![48P Pinion Gear,28T:SLH](http://midsouthhobbies.com/cdn/shop/files/hhobtra4728_384x384.jpg?v=1711696666)
4728 Pinion Gear 48P 28T 4-Tec
Overview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...
View full detailsOverview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...
View full detailsDifferential (34-groove)/ flanged side-cover & screws
Half shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)
Idler gear, steel (16-tooth)/ idler gear shaft/ 3x8mm flat metal washer/ 8x12x0.5mm PTFE-coated washer/ 3x6mm flat metal washer/ 3mm nylon locknut ...
View full detailsSlide carb linkage set (throttle link, brake link, and hardware)
Head protector, cooling head (2) (TRX® 2.5, 2.5R)
Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)
Spring, shock (white) (GTR) (front) (1.3 rate gold) (1 pair)
Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
Turnbuckles, toe-links, 61mm (front or rear) (2) (assembled with rod ends and hollow balls)
Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/ 4x18 BCS (2)/ flat-head engine mount screws 3x10 (2)
Differential CV output drive (machined steel) (1)/ screw pin (with threadlock) (1)/ cross pin (1)/ drive pin (1)/ set screw (1)
Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)
Spring, shock (GTR) (1.76 rate, orange) (1 pair)