Under $50

Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)

Nuts, 3mm nylon locking (12)

Screws, 3x10mm cap-head machine (hex drive) (6)/ lock washers (6)/ hex wrench

Collars, screw (2)/ grub screws, 3mm (2)

Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...

Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber lin...

Turnbuckle, aluminum (red-anodized), camber link, rear, 49mm (1) (assembled with rod ends & hollow balls) (See part 3741X for complete camber l...

Springs, rear (white) (2)

Screws, 4x10mm button-head machine (hex drive) (6)

Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)

Gear set, close ratio (1st speed gear 21T, 18T input gear)

Output gear, 33-tooth (1)/ spacers (2)

Input shaft/ drive gear assembly (18-tooth steel top gear)

Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4)

Front body mounting posts (2) with screws

Adapters, wheel (for use with aftermarket wheels in order to adjust wheel offset)

Ball bearings (5x8x2.5mm) (8) (for wheels only)

Ball bearings (6x12x4mm) (2)

Pressure rings, slipper (notched) (2)