traxxas

Single-speed conversion kit (Eliminates two-speed mechanism for reduced weight, less rotational mass)

Ball bearing, black rubber sealed (20x32x7mm) (2)

Ball bearing, black rubber sealed, stainless (20x32x7mm) (2)

Rod, connecting (TRX® 2.5, 2.5R, 3.3)

Head protector, cooling head (2) (TRX® 2.5, 2.5R)

Gaskets, cooling head: 0.15, 0.25, 0.35mm (1 each) (TRX® 2.5, 2.5R)

Piston/sleeve (matched set), wrist pin clips(2) (TRX® 2.5, 2.5R)

Wrist pin/ wrist pin clips (2) (TRX® 2.5, 2.5R)

Wrist pin clips (3) (TRX® 2.5, 2.5R, 3.3)

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX® 2.5, 2.5R, 3.3)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)

Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)

Header spring/ gaskets (TRX® 2.5, 2.5R, 3.3)

O-ring, header 12.2x1mm (TRX® 2.5, 2.5R, 3.3)

Air filter body (high volume)/ filter support/ cap/ foam filter, pre-filter/ air filter base/ wire mount/ hardware (1 each)

Backplate/ 20x1.4mm O-ring (for engines with starter) (TRX® 2.5, 2.5R, 3.3)

Piston/sleeve (matched set), wrist pin clips (2) (TRX® 3.3)

Wrist pin (1), Wrist Pin Clips(2) (TRX® 3.3)

Overview Revo's linkage-based suspenciosn requires different push rod assmeblies depending upon which rockers are used, Strong, 7075-T6 aluminum ve...

Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)

Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2))