TRAXXAS

Suspension arms (upper) (2) (fits T-Maxx®/E-Maxx)

Spacer, pushrod (aluminum, blue) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)

Turnbuckles, 106mm (front tie rods) (2) (includes installed rod ends and hollow ball connectors)

Turnbuckles, 116mm (rear toe control links) (2) (includes installed rod ends and hollow ball connectors)

Header, aluminum (T-Maxx®) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Turnbuckles, toe links (5.0mm steel) (front) (2)

Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6)

Screw pin, 2.5x18mm (6)

Screw pin, 4x15mm (6)

Nuts, 5mm flanged nylon locking (steel, serrated) (8)

Spacers, steel (Jato® Twin-Spoke wheels, front) (4)

E-clips, 1.5mm (24)

Half shafts, center (front and rear) (external-splined (2)/ internal-splined (2))/ metal U-joints (4)

Drive cups, inner (2) Revo®/ E-Revo® (first generation)/ T-Maxx®/ E-Maxx (steel constant-velocity driveshafts)/ screw pin, M4/15 (2)

Drive cups, inner (2) Revo® (steel constant-velocity driveshafts)/screw pin, M4/15 (2) (for use only with 5333R adjustable wheelbase rear suspensio...

Cover plates and seals, forward only conversion (Revo®) (Optidrive® blank-out plate, Optidrive® sensor cover, shift fork cover) These seals cover a...

Nuts, 2.5mm nylon locking (12)

Box, receiver (upper and lower halves)/ clip (1)/ foam pad

Engine mount, aluminum/ 3x10 CS with washers (8)

Suspension screw pin set, hardened steel (hex drive)

Stub axle, (1)/ axle sleeve (1) Revo®/T-Maxx®/E-Maxx (steel constant-velocity driveshaft)

Slide carb linkage bellcrank post/ 5x8x2.5 plastic bushing (2)/ bellcrank/ 5x8x0.5 fiber washer (2)/ 3x10 WM

Slide carb linkage set (throttle link, brake link, and hardware)

Pull string, recoil starter (TRX® 2.5, 2.5R)