TRAXXAS

Heavy-duty construction for total torque transfer Fully assembled and ready to install Captured U-joint pins prevent loosening and loss Rubber boot...

Overview Traxxas offers a complete selection of 48-pitch spur gears for performance tuning.

Bulkhead (front) (black)

Ring gear, differential/ pinion gear, differential (rear)

Axle carriers, left & right (2 each)

Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4)

Wheel hubs, 12mm hex (2)/ stub axle pins (2)

Turnbuckles, 36mm (2)

Main diff gear w/side cover plate & screws

Overview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...

Overview Strengthens the front bulkhead and suspension arms. Requires #TRA2640 suspension pins to complete installation.

Screws, 4x22mm button-head machine (hex drive) (6)

Screws, 3x12mm countersunk self-tapping (6)

Overview Replace the molded shock caps on your Ultra Shocks with the increased durability and superior sealing of our hard-anodized, Teflon-coated ...

Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)

Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)

Screws, 3x8mm roundhead self-tapping (6)

Screws, 3x10mm cap-head machine (hex drive) (6)/ lock washers (6)/ hex wrench

Collars, screw (2)/ grub screws, 3mm (2)

Exhaust pipe,rubber/ metal support tubes (2)/ metal fitting tube(1)

Overview Includes battery hold-down (grey) (1), receiver hold-down (grey) (1), metal posts (2), spacers (2), body clips (2), servo tape, adhesive f...

Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...